We get some questions from time to time on whats the best way to install our wing kits.
Check out the Install Instructions for a run down on how to mount up!
Pro tips -
- Add some lubricant on the hardware as stainless steel on stainless steel with a Nyloc nut can sometimes Bind up (this is called Thread Galling). Lubricant will frequently eliminate this and help them tighten down smoothly.
- Never use power tools when installing the wing to the car, Hand tools only! Power tools increases the heat and chances of Galling is much higher.
- Add some bracing to the underside of the trunk, whether its a bolt in or weld in brace to support the load of the wing and stop potential warping or cracking etc.
- Check the hardware is tight from time to time to make sure your always ready to rock and roll.
- Once installed, Snap some pics, do a post on social media tagging and mentioning BCL. Email us a screen shot of the post and we will send you a BCL Approved sticker!
